tree removal cost by diameter

Tree Removal Cost by Diameter: 2026 DBH Price Chart

Trunk diameter is one of the most reliable ways to predict what a tree service will charge, because a thicker trunk means more weight to cut, lower and haul away. Most tree removal quotes fall between $150 for a trunk under 6 inches wide and $4,500 or more for one wider than 48 inches. Your exact price also depends on the factors that affect tree removal cost, such as access, tree condition and local labor rates.

Quick Answer: Tree Removal Cost Chart by Diameter

Tree Removal Cost by Trunk Diameter

Estimated professional pricing based on DBH (Diameter at Breast Height)

Trunk Diameter (DBH)Typical Removal Cost
Up to 6 inches$150 – $250
6 – 12 inches$250 – $450
12 – 24 inches$450 – $900
24 – 36 inches$900 – $1,400
36 – 48 inches$1,400 – $2,200
48 inches and larger$2,200 – $4,500+

For a broader view across all tree types, see our tree removal cost guide. To get a number for your own tree in seconds, use the tree removal cost calculator.

What Is Tree Diameter (DBH)?

Arborists and foresters measure trunk thickness as DBH, or diameter at breast height. DBH is the width of the trunk measured 4.5 feet (about 1.37 meters) above the ground. Tree companies use it because it is a consistent point that ignores the swollen root flare at the base and the branch stubs higher up.

On sloped ground, the measurement is taken 4.5 feet up from the uphill side of the trunk. On a leaning tree, it is taken 4.5 feet up along the stem, in the direction of the lean. The New York State DEC’s DBH measurement guidelines lay out these same rules.

How to Measure Your Tree’s Diameter

You do not need professional gear to get a close number:

  1. Measure 4.5 feet up from the ground and mark the trunk.
  2. Wrap a soft tape measure around the trunk at that mark and keep it level. This gives you the circumference.
  3. Divide the circumference by 3.14 to get the diameter.

For example, a trunk with a 38-inch circumference is about 12 inches in diameter. A trunk with a 75-inch circumference is about 24 inches.

Professional arborists often use a diameter tape (D-tape). It is marked so it reads the diameter directly when wrapped around the trunk, as the Michigan Tech forestry curriculum describes. Giving a tree company your DBH before the visit helps them quote more accurately over the phone.

Why Does Diameter Change the Price?

A wider trunk does not just cost a little more. It changes how the whole job is done.

Wood volume grows with the square of the diameter, so a 24-inch trunk holds roughly four times as much wood as a 12-inch trunk of the same height and shape. That extra weight affects every part of the job:

  • Cutting time: Large trunks need powerful saws with long bars and are cut in many sections.
  • Labor: Heavy sections have to be roped and lowered with rigging, so the crew needs more hands on the ground.
  • Equipment: Big trunks can call for a bucket truck, a skid steer or a crane.
  • Hauling and disposal: A large trunk can weigh several tons, and disposal sites charge by weight, so a thicker trunk raises both the trips and the dump fees.

Tree Removal Cost by Diameter Range

Up to 6 Inches: $150 – $250

These are young ornamental trees, saplings and small fruit trees. A small tree in an open area can often be cut by one worker in under an hour, without lowering ropes or heavy equipment.

6 to 12 Inches: $250 – $450

This range covers semi-mature trees such as young pines, birch and decorative landscape trees. A 10-inch tree in a clear yard is usually felled in one piece, cut into manageable lengths and chipped. For a closer look at how overall tree size affects pricing, see our guide to tree removal cost by size.

12 to 24 Inches: $450 – $900

This is a large tree for most residential yards. A climbing arborist typically removes the tree from the top down, lowering branches and trunk sections on ropes to protect the house, fence or lawn.

Tree Removal Cost Breakdown

Estimated pricing based on trunk diameter and job complexity

Trunk DiameterTypical CostWhat the Job Usually Involves
12 – 15 inches$450 – $650Climbing, with a clear drop zone
18 – 20 inches$650 – $900Rigging and lowering lines, often near structures

A tree this size often falls in our large tree removal cost bracket.

24 to 36 Inches: $900 – $1,400

Sections of a trunk this size are too heavy to handle by hand, so crews rely on rigging blocks and heavy equipment. A 30-inch or 36-inch tree often needs a crew of three or four people to manage the ground work safely.

36 to 48 Inches: $1,400 – $2,200

At this size, climbing alone can be slow and risky. Many companies add a crane or bucket truck to the quote. With a crane, the crew hooks a trunk section, saws it free and lifts it over roofs or power lines. You can read more in our crane tree removal cost guide.

Over 48 Inches: $2,200 – $4,500+

These giants need an experienced crew, heavy hauling and a detailed safety plan. If the trunk is hollow or decayed, the work becomes less predictable and the price moves toward the top of the range or beyond.

Why You Cannot Simply Multiply by the Inch

Some quotes are given as a price per inch of diameter. Using the chart above, typical jobs work out to roughly $20 to $45 per inch up to 48 inches. Above 48 inches it can pass $50 per inch, because the equipment and risk climb faster than the width. A simple multiplication will usually under-estimate large trees, so treat the per-inch figure as a rough check and not as a quote.

Diameter vs. Height vs. Size

People often assume height sets the price. In reality, height and diameter affect the job in different ways.

Tree Dimensions & Removal Complexity

Analyzing the impact of trunk diameter and total height on removal operations

FactorEffect of a Large DiameterEffect of a Large Height
LaborHigh: heavy sections to processHigh: long climbing time
EquipmentMedium: larger saws and loadersHigh: bucket truck or crane
DisposalHigh: heavy trunk tonnageMedium: lighter brush
RiskMedium: heavy sections to controlHigh: wind load and long fall path

Height decides how long the climb is and what equipment can reach the canopy. Diameter decides how much the wood weighs. A short tree with a huge trunk, such as an old 35-foot oak with a 40-inch trunk, can cost more than a 70-foot pine with a slim 10-inch trunk. For the height side of the picture, see tree removal cost by height.

How Tree Species Affect the Price at the Same Diameter

Two trees with the same DBH can cost very different amounts because of wood density and structure.

  • Oak: Dense, heavy hardwood with spreading limbs. It dulls saw chains and needs careful rigging, so it sits at the high end of any range. In Florida, large live oaks are a common example. See our oak tree removal cost page.
  • Pine: A softwood with one straight trunk, so it usually costs less than a hardwood of the same width. Crews must still deal with sticky sap. See pine tree removal cost.
  • Maple: A mid-range hardwood with heavy canopies and tight branch joints that need careful sectioning. See maple tree removal cost.
  • Palm: Palms have fibrous trunks with no growth rings, and the trunks are straight, so they are usually cheaper to take down than hardwoods of the same diameter. If you only need the fronds cut, see how much it costs to trim palm trees.
  • Cedar: A lighter, rot-resistant softwood that is usually easier and cheaper to saw, split and haul.

Extra Costs That Are Often Not in the Base Price

Check whether your quote covers only felling the tree or the whole cleanup:

  • Stump grinding: Commonly priced at about $3 to $6 per inch of stump diameter, and it rises with width. Estimate it with our stump grinding cost calculator. Full stump extraction costs more than grinding.
  • Hauling and disposal: Logs and brush are hauled to a dump or processing site. Costs climb sharply once the trunk passes about 24 inches.
  • Debris cleanup: Raking chips, blowing off sawdust and repairing lawn damage.
  • Combined jobs: Ask whether bundling removal and grinding lowers the total. See tree removal and stump grinding cost.

Other Factors That Work Together with Diameter

  • Tree condition: A dead or decayed tree is unpredictable. Brittle wood cannot hold a climber’s weight, so the crew may need a bucket truck or crane. See dead tree removal cost.
  • Access: A tree in a fenced backyard that blocks machinery forces the crew to carry or drag sections out by hand, which adds labor hours.
  • Power lines: Work near live lines needs specially trained crews and costs more. See tree removal cost near power lines.
  • Storm damage: If a trunk is leaning or has fallen, the price depends on urgency and risk. See emergency tree removal cost.
  • Permits: Many cities protect trees above a certain DBH, often in the range of 6 to 12 inches, and may require a permit before you cut. Fees often run about $50 to $150 where they apply. See tree removal permit cost. In Florida, rules differ by city, so check Florida tree permit requirements by city.
  • Arborist assessment: An inspection typically costs $75 to $150 and is sometimes credited toward the job.

How to Get an Accurate Quote

  1. Know your DBH. Measure it using the steps above and give it to each company.
  2. Get at least three written estimates with the work broken down line by line.
  3. Ask for an ISA Certified Arborist. The International Society of Arboriculture (ISA) certifies arborists, and most reputable companies carry liability insurance and workers’ compensation. Ask to see proof.
  4. Confirm what is included: stump grinding, hauling, cleanup and any permit fees.
  5. Be cautious of a price far below the others. It may mean missing insurance or a quote that leaves out disposal.

Frequently Asked Questions

What does tree removal cost by trunk diameter?

Typical prices run from $150 to $250 for trunks up to 6 inches, and from $2,200 to $4,500 or more for trunks over 48 inches. The mid-range of 12 to 24 inches usually costs $450 to $900.

How much does it cost to remove a 12-inch tree?

A 12-inch tree usually sits at the border of the $250 to $450 and $450 to $650 ranges, depending on access and whether a climber is needed. Hauling and stump grinding are extra if not listed.

How much does it cost to remove a 24-inch tree?

A 24-inch trunk generally falls between about $900 and $1,400. Heavy rigging or a crane can push the price up.

Is diameter or height more important for pricing?

Neither alone. Height drives climbing time and equipment, while diameter drives weight, hauling and disposal. A short tree with a very wide trunk can cost more than a tall, slim one.

Does stump grinding come with the removal price?

Often not. Many companies quote it separately, commonly by the inch of stump diameter. Ask for it in writing, or compare the combined price to the price of each service on its own.

Do I need a permit to remove a large tree?

It depends on your city or county, and many protect trees above a certain diameter. Always check with your local building or planning office before cutting. If you live in a homeowners association, also read its tree rules.

Conclusion

Trunk diameter, measured as DBH, is one of the most useful numbers you can bring to a tree service quote. Wider trunks weigh more, take longer to cut and haul, and often need rigging or cranes. Because wood volume grows with the square of the diameter, a tree twice as wide holds about four times the wood.

Treat the chart as a starting point. Condition, access, power lines, species and local permit rules can all move the final price. Measure your tree, get several written estimates from insured and certified arborists, and confirm what each one includes. To plan before you call, try our tree removal cost calculator.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top